YN01V00153R300 Bucket Cylinder Seal Kit for Kobelco Excavators SK200-8 SK210-8 Hydraulic Repair
About the YN01V00153R300 Seal Kit
The YN01V00153R300 bucket cylinder seal kit is an aftermarket repair kit supplied by DJF for the bucket cylinders of Kobelco SK200-8 and SK210-8 series excavators. Multiple third-party listings (eBay, Amazon) match this number to Kobelco SK200-8, SK210-8 and SK210LC-8 machines.
Listed dimensions vary between sources, so the exact dimensions are confirmed per order before dispatch.
Verified Specifications
| Specification | Detail |
|---|---|
| Part Number | YN01V00153R300 — as listed on page |
| Compatible Models | Kobelco SK200-8, SK210-8, SK210LC-8 — per third-party listings (eBay, Amazon) |
| Cylinder Position | Bucket cylinder |
| Condition | New aftermarket replacement |
Fitment Verification
Send your machine serial number and the measured bore/rod of the bucket cylinder to [email protected] before ordering; we confirm the YN01V00153R300 reference against your cylinder before dispatch.
Conflict note: Listed dimensions conflict between sources: the page states 90 mm rod / 125 mm bore, while deedparts.com lists 80 mm rod / 120 mm bore — confirm the actual measurements of your bucket cylinder before ordering.
Replacement Scope
The kit covers the sealing elements needed to re-seal the bucket cylinder of a Kobelco SK200-8 / SK210-8 excavator — dynamic rod and piston seals, wipers, wear rings, buffer seals and static O-rings. Exact component types and quantities of the YN01V00153R300 kit are confirmed with the factory before dispatch.
Factory Inspection & Packing
Each YN01V00153R300 kit is inspected against the confirmed reference before packing: seal lips and surfaces are checked, the kit is packed to protect the seals from dust and moisture, and the carton label carries the part number and batch. Inspection photos or a packing list can be provided on request.
Wholesale Ordering
MOQ: 5 kits per part number.
DJF Seals supplies this kit factory-direct to distributors, repair shops and excavator fleets. Email [email protected] or [email protected] with your quantity and machine details for a wholesale quotation and lead time.
FAQ
Q1: How do I confirm YN01V00153R300 fits my Kobelco excavator?
A1: Please send us your machine serial number, cylinder bore/rod size or original part number. We will verify the match with you before processing the order.
Q2: Which dimensions are correct — 90×125 or 80×120 mm?
A2: The page previously listed 90 mm rod / 125 mm bore, while deedparts.com lists 80 mm rod / 120 mm bore. Measure your actual bucket cylinder and confirm both dimensions with us before ordering.
Q3: I cannot find the model I want. Do you have all the seal kits here?
A3: No — we carry tens of thousands of seal kits, and only a small part is shown on this page. We stock seal kits for most construction machinery. Please contact us.
Q4: What is the wholesale MOQ?
A4: The MOQ is 5 kits per part number. Email [email protected] or [email protected] for a factory-direct quote.
Aftermarket replacement part — not manufactured by or affiliated with Kobelco Construction Machinery. Fitment must be confirmed before ordering.
