Product Overview

The YN01V00175R300 hydraulic cylinder seal kit is a factory-manufactured OEM replacement kit cross-referenced against the Kobelco part number YN01V00175R300. Independent parts listings consistently identify the number as the arm cylinder seal kit for Kobelco excavators: OringsAndMore sells it for the Kobelco SK200-8 and SK210LC-8 arm cylinders with a 95 mm rod x 135 mm bore, and hwpartstore sells the same SK200-8 arm cylinder rebuild kit with the same 95 mm rod x 135 mm bore figures. The current DJF page titles the kit for the Kobelco SK200-8 and SK210-8 arm cylinder and adds the wording “SKF Oil Seals Hydraulic Service Kit” in the page title; the SKF seal wording and the page’s own 90 / 125 mm figures are not corroborated by the sources reviewed (see Fitment Verification). This page (SKU DJF-19293) is a separate page from the same part number’s other listing; the fields here apply only to this URL.

DJF Seals manufactures and supplies the YN01V00175R300 kit at factory-direct wholesale pricing for Kobelco excavator dealers, rental fleets, repair shops and fleet maintenance programs.

Verified Application

The following application data was cross-checked against aftermarket parts listings (OringsAndMore, hwpartstore, FridayParts, eBay, seal-kits.com):

Materials, pressure rating, temperature range, exact piece counts, certifications, seal brand and service life are factory data and are not independently verified for this part number; such claims on the current page are not repeated here (see Fitment Verification).

Replacement Scope

This kit supplies the sealing elements needed to reseal the arm (stick) cylinder of the verified Kobelco SK200-8 and SK210-series machines. OringsAndMore and hwpartstore both list the kit for the SK200-8 arm cylinder at 95 mm rod x 135 mm bore, and FridayParts and eBay extend the application to the SK210 family. Kit contents vary between suppliers, so the exact component set is matched to your cylinder before shipment.

Fitment Verification

The part number, cylinder position, fitments and dimensions above were cross-checked against the following sources:

• OringsAndMore: sells the YN01V00175R300 kit for the Kobelco SK200-8 and SK210LC-8 arm cylinders with a 95 mm rod x 135 mm bore.
• hwpartstore: sells the same SK200-8 arm cylinder rebuild kit with the same 95 mm rod x 135 mm bore figures — the second independent source for the dimensions.
• FridayParts and eBay and seal-kits.com: cross-list the number for the Kobelco SK200-8 arm cylinder family.
• Current DJF page (sk200-8-sk210-8-arm-cylinder-seal-kit-for-kobelco-excavator-skf-oil-seals-hydraulic-service-kit, SKU DJF-19293): titles the kit for the Kobelco SK200-8 and SK210-8 arm cylinder.
• Conflict note: dimensions — the current page records 90 mm / 125 mm, while OringsAndMore and hwpartstore both give 95 mm rod x 135 mm bore. The two independent figures disagree with the page; the multi-source 95 x 135 mm value is used above and the difference is kept here rather than silently resolved.
• Conflict note: seal brand — the page title includes “SKF Oil Seals Hydraulic Service Kit,” but the independent sources reviewed sell the kit simply as the Kobelco arm cylinder seal kit and do not corroborate an SKF-brand seal content. The SKF wording is not asserted above.
• Conflict note: page / post identity — YN01V00175R300 also exists on a different DJF URL (Post 18874). This content package and its SEO fields apply only to the DJF-19293 URL above; the two pages must not be merged or share the same copy.
• Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified.

Factory Inspection & Packing

Each YN01V00175R300 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.

Wholesale Ordering

DJF Seals supplies the YN01V00175R300 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.

MOQ

MOQ: 5 kits.

FAQ

Q: Which machines does the YN01V00175R300 seal kit fit?
A: OringsAndMore, hwpartstore and seal-kits.com anchor the kit to the Kobelco SK200-8 arm cylinder, and OringsAndMore and FridayParts also list the SK210LC-8 (the current page uses the SK210-8 wording). Verify the machine model and cylinder before ordering.

Q: Which cylinder does it seal?
A: The arm (stick) cylinder. OringsAndMore, hwpartstore, FridayParts, eBay and seal-kits.com all state the arm-cylinder application.

Q: What are the rod and bore of this kit?
A: OringsAndMore and hwpartstore both give 95 mm rod x 135 mm bore. The current page records 90 mm / 125 mm, which disagrees; the multi-source 95 x 135 mm figures are used here.

Q: Does this page duplicate the other YN01V00175R300 page?
A: No. This is SKU DJF-19293 with the “SKF Oil Seals Hydraulic Service Kit” slug, a different URL from the same part number’s other page. The content and SEO fields here apply only to this URL.

Q: What is the minimum order quantity?
A: MOQ: 5 kits.