SB60 Hydraulic Breaker Seal Kit for Soosan SB60 Breakers (C2X001 / C21011)
Product Overview
SB60 is the Soosan hydraulic breaker model family used to name this seal kit, and suppliers also cross-reference the kit by the breaker seal kit numbers C2X001 and C21011. Independent aftermarket listings consistently sell the C2X001 / C21011 seal kit for the Soosan SB60 breaker family, with model variants listed as SB60, SB60TS-P, SB60TSP and SB60TR-F (also written SB60TRF) by different sellers, and SQ60 added by several suppliers.
DJF Seals manufactures and supplies the SB60 breaker seal kit at factory-direct wholesale pricing for breaker service shops, attachment dealers and equipment maintenance programs.
Verified Application
The following application data was cross-checked against aftermarket parts listings (huilianmachine, seal-kits.com, Amazon, eBay, Peterson Attachments) and a Soosan hydraulic breaker parts list:
| Part Number | SB60 (Soosan breaker model reference; kit also sold as C2X001 / C21011 by several suppliers) |
| Product Type | Hydraulic breaker seal kit (aftermarket replacement) |
| Position | Hydraulic breaker (hammer) seal kit |
| Verified Fitments | Soosan SB60 family — SB60, SB60TS-P, SB60TSP and SB60TR-F / SB60TRF cited by different suppliers; SQ60 added by several sellers |
| Cross-brand | Peterson Attachments sells a kit titled for both Stanley MB40EX and Soosan SB60 (see Fitment Verification) |
| Condition | New, aftermarket replacement |
Dimensions, materials, pressure rating, temperature range, exact piece counts, certifications and service life are not independently verified for this kit; such claims on the current page are not repeated here (see Fitment Verification).
Replacement Scope
This kit supplies the sealing elements required to reseal a Soosan SB60 breaker. Different sellers reference the same kit under the numbers C2X001 or C21011 for the SB60 family. Kit contents differ between suppliers; send your breaker model, serial number and the kit number shown on the original packing so the factory matches the correct component set.
Fitment Verification
The part number, position and fitments above were cross-checked against the following sources:
- huilianmachine (huilianmachine.com): breaker seal kit C2X001 / C21011 for the Soosan SB60 family, listing SB60TS-P / SB60TSP, SQ60 and SB60TR-F variants alongside SB60.
- seal-kits.com: seal kit for the Soosan SB60 breaker.
- Amazon and eBay aftermarket titles: C2X001 / C21011 breaker seal kit with SB60, SB60TSP and SB60TR-F in the fitment lines.
- A Soosan hydraulic breaker parts list places the SB60-family seal kits together with the larger SB-series breakers (SB60 through SB151) — family-level confirmation only.
- Peterson Attachments (petersonattachments.com) lists a breaker seal kit titled “Stanley MB40EX Soosan SB60”; the Stanley MB40EX pairing is a seller-cited cross-fit and was the only independent source found for it in this review.
- Conflict note: the current page titles the kit “for Soosan Stanley hammers” and lists the Soosan kit numbers C2X001 / C21011 — consistent with the sellers above; the Stanley MB40EX equivalence, however, rests on the Peterson listing and should be checked against the breaker model and serial number.
- Conflict note: variant spellings and coverage (SB60TS-P vs SB60TSP; SB60TR-F vs SB60TRF; with or without SQ60) differ between sellers — verify the breaker’s exact model and serial number.
- Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified.
Factory Inspection & Packing
Each SB60 breaker seal kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.
Wholesale Ordering
DJF Seals supplies the SB60 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.
MOQ
MOQ: 5 kits.
FAQ
Q: Is SB60 the seal kit part number or the breaker model?
A: SB60 is the Soosan breaker model family. Aftermarket suppliers sell the seal kit for that breaker under the numbers C2X001 and C21011, and DJF supplies the kit under the SB60 page name.
Q: Which breaker variants does this kit cover?
A: Suppliers cite SB60, SB60TS-P / SB60TSP and SB60TR-F / SB60TRF; some add SQ60. Verify the exact breaker model and serial number with our team before shipment.
Q: Does the kit fit a Stanley MB40EX hammer?
A: The pairing appears in a Peterson Attachments kit title and on the current page; treat it as a seller-cited cross-fit and verify it against the breaker model, serial number and the original kit number.
Q: What is included in the kit?
A: Kit contents vary between suppliers; DJF matches the component set to your breaker’s seal group at order time. Exact contents and counts should be requested with your model details.
Q: What is the minimum order quantity?
A: MOQ: 5 kits.
