PH01V00043R400 Boom Seal Kit for New Holland E50B SR Compact Excavator
Product Overview
The PH01V00043R400 boom seal kit is an aftermarket hydraulic seal kit for the boom cylinder of the New Holland E50B SR compact excavator. The E50B SR is a documented New Holland compact excavator model (a service manual exists for it and machine spec databases cover the E50B series from 2009 onward), and the part number follows the PH-prefix kit numbering format used across the CNH / New Holland range. DJF Seals supplies this kit factory-direct for parts suppliers, compact-excavator repair shops and rental fleets.
On a compact excavator the boom cylinder does the heavy lifting for every dig cycle, so worn seals cause visible boom drift, oil weeps and a loss of breakout force. Rebuilding with a matched kit restores clean, leak-free cylinder performance.
Verified Application
Verified application (with limited independent footprint): boom cylinder of the New Holland E50B SR compact excavator. The machine model is confirmed by independent references (ManualsLib service manual; Lectura Specs coverage of the E50B series). An independent marketplace listing (eBay.de) sells this exact part number as a “Boom Cylinder Seal Kit For New Holland E50B SR Compact”.
Verification gap: no public New Holland / CNH OEM catalog entry for PH01V00043R400 was found during research. The part number is documented on this DJF listing and on one independent marketplace listing; treat it as an aftermarket interchange number and verify your cylinder part number before ordering.
Replacement Scope
The kit is intended to replace the complete sealing set of one boom cylinder: rod seal, piston seal, wiper, guide/wear rings and static O-rings. Compact excavator cylinders are short-stroke but high-cycle, so the wiper and rod seal see constant abrasion from mud and fines; a complete matched set is the right way to reseal the cylinder in one service session.
Exact component quantities are confirmed against your cylinder at order time, as the factory does not publish a fixed parts list for this number.
Fitment Verification
- Confirm the machine: New Holland E50B SR compact excavator.
- Confirm the cylinder position: boom cylinder.
- Because the public cross-reference footprint is small, provide the stamped cylinder part number or the removed seals with your inquiry so we can match the kit precisely.
Manufacturer-listed, not independently verified: rod 55 mm / bore 100 mm, and high-grade polyurethane (PU), NBR and PTFE material composition. These figures come from the DJF listing; independent public confirmation was not found. Measure the cylinder before ordering.
Factory Inspection & Packing
Each kit is assembled in our factory from compound-checked seal batches, gauged against the PH01V00043R400 picking list, and packed with the sealing lips protected for transit. Packs carry the part number label and ship in reinforced cartons with the packing list and commercial invoice for air, sea or express freight.
Wholesale Ordering
DJF supplies the PH01V00043R400 boom seal kit factory-direct. Wholesale buyers can also consolidate with other New Holland compact-excavator and backhoe-loader kits from our range, cutting freight cost per kit while keeping one quality standard across the order.
Minimum Order Quantity (MOQ)
MOQ: 5 kits. Single-kit trial orders are accepted so a workshop can verify fitment before scaling up; tiered wholesale pricing applies at volume. Contact our export team for the current MOQ, price breaks and lead time for PH01V00043R400.
FAQ
Q: Which machine is the PH01V00043R400 kit for?
A: The New Holland E50B SR compact excavator, boom cylinder. The E50B SR is a documented New Holland model, and an independent eBay listing sells this exact number for the same application.
Q: Is PH01V00043R400 an original New Holland part number?
A: The number uses the PH-prefix format of the CNH / New Holland parts system, but no public OEM catalog entry was found, so we present it as an aftermarket interchange number. Send us your cylinder part number and we will double-check the match.
Q: What are the rod and bore sizes?
A: The DJF listing states rod 55 mm and bore 100 mm. These are manufacturer-listed values; measure your boom cylinder or send the cylinder number so we can confirm before shipment.
Q: Do you make other New Holland seal kits?
A: Yes. Our range covers New Holland backhoe loaders (for example the 85804740 loader bucket kit and the 87428631 swing cylinder kit) as well as compact excavator kits; send us the part number you need.
