71400186 Arm and Bucket Cylinder Seal Kit for Fiat-Hitachi FH200 and FH300 Excavators
Product Overview
The 71400186 hydraulic cylinder seal kit is a factory-manufactured aftermarket replacement kit cross-referenced against the Fiat-Hitachi part number 71400186 (some aftermarket catalogs write it FH-71400186). Independent aftermarket listings consistently identify the number as the arm cylinder seal kit for the Fiat-Hitachi FH200-1 and FH200-2 excavators and as the bucket cylinder seal kit for the FH300-1 and FH300-2 excavators, in a 95 mm rod configuration.
DJF Seals manufactures and supplies the 71400186 kit at factory-direct wholesale pricing for Fiat-Hitachi equipment dealers, repair shops and fleet maintenance programs.
Verified Application
The following application data was cross-checked against aftermarket parts listings (OringsAndMore, Hercules Sealing Products, eBay, Amazon, amoparts, FridayParts, ReliableAftermarketParts):
| Part Number | 71400186 (Fiat-Hitachi reference; aftermarket catalogs also write FH-71400186) |
| Product Type | Hydraulic cylinder seal kit (aftermarket replacement) |
| Cylinder Positions | Arm cylinder for FH200-1 / FH200-2; bucket cylinder for FH300-1 / FH300-2 |
| Verified Fitments | Fiat-Hitachi FH200-1, FH200-2, FH300-1 and FH300-2 excavators |
| Rod (per OringsAndMore & Hercules) | 95 mm rod kit |
| Condition | New, aftermarket replacement |
Materials, pressure rating, temperature range, exact piece counts, certifications and service life are factory data and are not independently verified for this part number; such claims on the current page are not repeated here (see Fitment Verification).
Replacement Scope
This kit supplies the sealing elements needed to reseal the arm cylinder (FH200-1 / FH200-2) or the bucket cylinder (FH300-1 / FH300-2) of the verified Fiat-Hitachi models. OringsAndMore describes the corresponding kit as covering wiper, U-cup, buffer and rod seals for the 95 mm rod application. Kit contents vary between suppliers, so the exact component set is matched to your cylinder before shipment.
Fitment Verification
The part number, cylinder positions and fitments above were cross-checked against the following sources:
- OringsAndMore (oringsandmore.com): lists 71400186 as a 95 mm rod kit — FH200-1 / FH200-2 for the arm cylinder and FH300-1 / FH300-2 for the bucket cylinder, describing wiper, U-cup, buffer and rod seals.
- Hercules Sealing Products (herculesus.com): FH-71400186 hydraulic seal kit, rod 95.000 mm, models FH200-1, FH200-2, FH300-1 and FH300-2.
- eBay, Amazon, amoparts, FridayParts and ReliableAftermarketParts listings repeat the same Fiat-Hitachi model set for 71400186.
- Several marketplace listings group 71400186 with the related number 71400189 as a combined cylinder seal kit set; 71400189 is a separate part number and is not included in this kit unless ordered together.
- Conflict note: the material claims on the current page (PU / NBR / PTFE) are factory data; no independent source located in this review states them, so they are not asserted in the copy above.
- Conflict note: no Fiat-Hitachi OEM catalog entry was accessible in this review; the identity, positions and models above rely on the independent listings listed.
- Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified.
Factory Inspection & Packing
Each 71400186 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.
Wholesale Ordering
DJF Seals supplies the 71400186 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.
MOQ
MOQ: 5 kits.
FAQ
Q: Which machines does the 71400186 seal kit fit?
A: Independent listings fit the kit to the Fiat-Hitachi FH200-1, FH200-2, FH300-1 and FH300-2 excavators — arm cylinder on the FH200 pair and bucket cylinder on the FH300 pair.
Q: Is this kit for the arm cylinder or the bucket cylinder?
A: Sellers split the number by machine: FH200-1 / FH200-2 use it on the arm cylinder and FH300-1 / FH300-2 use it on the bucket cylinder. Check the cylinder position on your machine before ordering.
Q: Is 71400189 included in this kit?
A: No. 71400189 is a separate Fiat-Hitachi part number that several sellers group with 71400186 in combined sets; order both numbers if both kits are needed.
Q: What does the 95 mm rod reference mean?
A: OringsAndMore and Hercules both list 71400186 as a 95 mm rod kit; use this figure together with the part number when matching the kit to the cylinder.
Q: What is the minimum order quantity?
A: MOQ: 5 kits.
