Product Overview

The 110507A1 lift cylinder seal kit is a factory-manufactured aftermarket replacement kit cross-referenced against the Case part number 110507A1 (also written 110507A1-A on several listings). Independent aftermarket listings consistently identify the kit as the lift cylinder seal kit for the Case 1818, 1825 and 1825B loaders, with the Case cylinder number 104516A1 cross-referenced by HWPartStore and by an Amazon listing for the same kit.

DJF Seals manufactures and supplies the 110507A1 kit at factory-direct wholesale pricing for Case equipment dealers, repair shops and fleet maintenance programs.

Verified Application

The following application data was cross-checked against aftermarket parts listings (TractorPartsASAP / PartsASAP, ReliableAftermarketParts, HWPartStore, Amazon):

Note: the current page lists rod 1.5 in / bore 3.5 in; that dimension set was not found in any independent source reviewed and is not asserted on this page (see Fitment Verification). Materials, pressure rating, temperature range, exact piece counts, certifications and service life are factory data and are not independently verified.

Replacement Scope

This kit covers the sealing elements required to reseal the lift cylinder of the verified Case 1818 / 1825 / 1825B loaders. Independent listings that cross-reference the kit to Case cylinder #104516A1 describe a 1-3/8 in rod x 2 in bore configuration (HWPartStore, Amazon). Exact kit contents and piece counts should be verified with the factory against your cylinder before ordering.

Fitment Verification

The part number, lift position and fitments were verified through multiple independent sources:

• TractorPartsASAP (tractorpartsasap.com) and PartsASAP (partsasap.com): “Hydraulic Seal Kit — Lift Cylinder, Case 1818-1825” — lift cylinder position; replaces OEM 110507A1; fitment Case 1818 / 1825 skid steer loader.
• ReliableAftermarketParts (reliableaftermarketparts.com): 110507A1 lift cylinder seal kit “Fits Case 1818, 1825, 1825B” — reference numbers 110507A1 and 110507A1-A; models field lists 1818, 1825.
• HWPartStore (hwpartstore.com): Case 1825B loader lift cylinder seal kit, cross-referencing Case cylinder #104516A1 with rod 1-3/8 in and bore 2 in.
• Amazon: “110507A1 Lift Cylinder Seal Kit” listing cross-referencing the same Case cylinder #104516A1 and the OEM number 110507A1, rod 1-3/8 in, bore 2 in. The listing title also contains odd “Fits John Deere 1818 1825” wording; this appears to be a reseller tagging artifact and no John Deere application is claimed on this page.
• Conflict note: dimension conflict — the current page claims rod 1.5 in / bore 3.5 in, while the independent listings above, which tie the kit to Case cylinder #104516A1, specify rod 1-3/8 in / bore 2 in. The independently sourced dimension set is labeled above; the page-only figures are not asserted.
• Conflict note: 110507A1-A appears in independent listings as an alternate OEM-style reference for the same kit; it is not treated as a separate product.
• Conflict note: no independent Case OEM catalog entry was accessible for this part number; the identity and fitments above rely on aftermarket listings.
• Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified.

Factory Inspection & Packing

Each 110507A1 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.

Wholesale Ordering

DJF Seals supplies the 110507A1 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.

MOQ

MOQ: 5 kits.

FAQ

Q: Which machines does the 110507A1 seal kit fit?
A: Verified fitments are the Case 1818, 1825 and 1825B loaders. Verify your machine model and serial number before ordering.

Q: Which cylinder does this kit service?
A: The lift cylinder of the loader lift linkage. Every independent listing reviewed identifies the kit as a lift cylinder seal kit.

Q: What are the cylinder dimensions for this kit?
A: Independent listings cross-referencing Case cylinder #104516A1 specify rod 1-3/8 in and bore 2 in (HWPartStore, Amazon). The 1.5 in x 3.5 in figures shown on the current page were not found in any independent source and are not asserted here.

Q: Does this kit fit John Deere machines?
A: No John Deere application is claimed. One reseller title contains odd “Fits John Deere” wording, which appears to be a listing artifact rather than a verified fitment.

Q: What is the minimum order quantity?
A: MOQ: 5 kits.