Product Overview

The 87428632 seal kit is a factory-manufactured aftermarket replacement kit cross-referenced against the genuine New Holland part number 87428632 (coded NH-87428632 in the Hercules Sealing Products catalog). The genuine CNH parts book entry for the New Holland LB115.B 4WS, served through Messicks, lists a seal kit referencing 87428632 (shown with the later kit number 87633295 for machines built before 3 February 2008) in the hydraulic ditching-cylinder section. Independent sources describe the kit for the backhoe arm/crowd cylinder — also called the crowd, dipper or ditching cylinder — in a 2-1/2 in rod x 4-1/2 in bore configuration, for the New Holland B95, LB75, LB90, LB90B, LB110 and LB110B backhoe loaders, with the LB115 family added by several sources including the genuine parts book.

DJF Seals manufactures and supplies the 87428632 kit at factory-direct wholesale pricing for New Holland equipment dealers, repair shops and fleet maintenance programs.

Verified Application

The following application data was cross-checked against the genuine CNH parts book (Messicks), the Hercules Sealing Products catalog, and aftermarket parts listings (ReliableAftermarketParts, Stetex, avspare.com, equipment-parts.com, TractorPartsASAP, eBay):

Note: materials, pressure rating, temperature range, exact piece counts, certifications and service life are factory data and are not independently verified.

Replacement Scope

This kit covers the sealing elements required to reseal the arm/crowd (ditching) cylinder of the verified New Holland backhoe loaders. Independent sources describe the kit in the 2-1/2 in rod x 4-1/2 in bore configuration (Hercules, eBay), with one eBay listing cross-referencing New Holland cylinder #87315531. Exact kit contents and piece counts should be verified with the factory against your cylinder before ordering.

Fitment Verification

The part number, cylinder position and fitments were verified through multiple independent sources:

• Hercules Sealing Products (herculesus.com): NH-87428632 — rod 2.500 in x bore 4.500 in; models B95, LB75, LB90B, LB110, LB110B; described as the backhoe “Arm/Crowd” kit.
• Messicks (messicks.com, genuine CNH/New Holland parts book, New Holland LB115.B 4WS): the hydraulic ditching-cylinder section lists a “KIT, SEALS” entry referencing 87428632, with the later kit number 87633295 also shown in the entry (87428632 applicable before 3 February 2008) — genuine OEM reference for the ditching cylinder.
• ReliableAftermarketParts (reliableaftermarketparts.com) and eBay (item 267400568263): “87428632 Hydraulic Cylinder Seal Kit” for the arm/stick/crowd/dipper cylinder — cylinder #87315531, rod 2-1/2 in, bore 4-1/2 in.
• Stetex (stetex.sk): seal kit for the ditching cylinder on New Holland LB110.B, LB115.B, LB115.B 4WS, LB115, LB110, B110, B110 Tier 3 and B115.
• avspare.com: “SEAL KIT … ARM CYLINDER … 87428632 New Holland”.
• TractorPartsASAP (tractorpartsasap.com): ditching cylinder seal kit fits B95, LB75, LB90 and LB110.
• equipment-parts.com: model list for the 87428632 kit including LB75.B, LB115, LB90.B, LB75, LB90, LB95, LB110.B, LB115.B and LB115.B 4WS.
• Conflict note: the current page lists B95, LB75, LB90, LB90B, LB110 and LB110B as arm/crowd fitments. Hercules confirms this set with the exception of LB90 (Hercules lists LB90B, not LB90).
• Conflict note: the LB115 family (LB115, LB115.B, LB115.B 4WS) and the B110 / B115 series appear in many independent sources — including the genuine CNH parts book ditching-cylinder entry — but are missing from the current page. These additional fitments are documented here because they are supported by the genuine parts book and multiple parts stores.
• Conflict note: cylinder naming varies across sources — arm/crowd (Hercules), arm (avspare.com, current page), crowd/dipper (eBay), ditching/dipper (Stetex, CNH parts book section). These names refer to the same backhoe bucket-arm crowd cylinder family.
• Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified.

Factory Inspection & Packing

Each 87428632 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.

Wholesale Ordering

DJF Seals supplies the 87428632 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.

MOQ

MOQ: 5 kits.

FAQ

Q: Which machines does the 87428632 seal kit fit?
A: Verified fitments are the New Holland B95, LB75, LB90, LB90B, LB110 and LB110B backhoe loaders. Several independent sources — including the genuine CNH parts book — additionally list the LB115 family (LB115, LB115.B, LB115.B 4WS) and the B110 / B115 series. Verify your machine model and serial number before ordering.

Q: Which cylinder does this kit service?
A: The arm/crowd cylinder of the backhoe, also called the crowd, dipper or ditching cylinder in different listings. The genuine CNH parts book places the kit in the hydraulic ditching-cylinder section of the New Holland LB115.B 4WS.

Q: What are the cylinder dimensions for this kit?
A: 2-1/2 in (2.500 in) rod x 4-1/2 in (4.500 in) bore, per the Hercules catalog and an eBay listing.

Q: Is 87428632 a genuine New Holland part number?
A: Yes. The genuine CNH parts book (via Messicks) lists a seal kit referencing 87428632, with the later kit number 87633295 shown in the same entry and 87428632 applicable before 3 February 2008. The DJF kit is an aftermarket replacement cross-referenced to that OEM number.

Q: What is the minimum order quantity?
A: MOQ: 5 kits.