7197632 Boom Cylinder Seal Kit for Bobcat 331, 334, 430, E27, E32, E32i, E34, E35 and E35i Excavators
Product Overview
The 7197632 boom cylinder seal kit is a factory-manufactured aftermarket replacement kit cross-referenced against the Bobcat part number 7197632. The current page identifies it as the boom cylinder seal kit for Bobcat compact excavators, listing the classic-series 331, 334 and 430 together with the E-series E27, E32, E32i, E34, E35 and E35i models, and instructs buyers to check the cylinder casting markings before ordering.
DJF Seals manufactures and supplies the 7197632 kit at factory-direct wholesale pricing for Bobcat equipment dealers, repair shops and fleet maintenance programs.
Verified Application
The following application data is based on the current product page and the parts listings reviewed for this package:
| Part Number | 7197632 |
| Product Type | Boom cylinder seal kit (aftermarket replacement) |
| Cylinder Position | Boom cylinder (identified by the current page title) |
| Fitments Listed on the Page | Bobcat 331, 334 and 430 (classic series) and E27, E32, E32i, E34, E35 and E35i (E-series) excavators |
| Machine Family | Bobcat compact excavators (confirmed at family level by the page URL and title) |
| Condition | New, aftermarket replacement |
The bore/rod figures, pressure and temperature ranges, seal-system descriptions and performance claims shown on the current page are factory data without independent confirmation in this review and are not asserted above (see Fitment Verification).
Replacement Scope
This kit supplies the sealing elements required to reseal the boom cylinder of the Bobcat compact excavators listed on the current page. Because the page asks buyers to verify the cylinder casting markings before ordering, the factory matches the component set to the casting-identified cylinder group at order time — send the casting marks or the seals removed from the cylinder so the kit is confirmed before shipment.
Fitment Verification
The part number, position and fitments above were reviewed as follows:
- Current page (djfseal.com): identifies 7197632 as a boom cylinder seal kit and lists Bobcat 331, 334, 430, E27, E32, E32i, E34, E35 and E35i excavators.
- The page instructs verifying the cylinder casting markings (“B7.3V” or “BC-HV55”) and excluding E45+ models and pre-2018 331G units with “B7.2” castings; this verification guidance is page-provided and should be checked against the actual cylinder casting.
- Conflict note: model 331 and the pre-2018 331G exclusion wording are page-only in this review — the independent sources reviewed did not explicitly confirm model 331 for this kit, so the model list above is presented as page data and each machine should be verified by casting ID and serial number.
- Conflict note: the page’s technical figures (bore/rod, operating and peak pressure claims, temperature range, material and seal-design descriptions, particle-exclusion and impact-cycle claims) are factory or marketing data; none were independently verified in this review and they are not repeated as facts above.
- Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified for this part number.
Factory Inspection & Packing
Each 7197632 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.
Wholesale Ordering
DJF Seals supplies the 7197632 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.
MOQ
MOQ: 5 kits.
FAQ
Q: Which machines does the 7197632 seal kit fit?
A: The current page lists Bobcat 331, 334, 430, E27, E32, E32i, E34, E35 and E35i excavators. Model 331 is page-listed only in this review, so verify the cylinder casting markings on your machine before ordering.
Q: Which cylinder does this kit service?
A: The page identifies the kit as a boom cylinder seal kit. Confirm the cylinder position and the casting ID on the machine you are repairing.
Q: How do I know which casting group my machine has?
A: Per the page, check the cylinder casting for “B7.3V” or “BC-HV55” markings; the page excludes E45+ models and pre-2018 331G units with “B7.2” castings. Our team can re-check the match if you send the casting photo.
Q: What are the bore and rod dimensions of this kit?
A: The bore/rod figures shown on the page are page-only factory data in this review and are not asserted here. Send your cylinder number or a photo of the seals and the factory will match the kit.
Q: What is the minimum order quantity?
A: MOQ: 5 kits.
