4654422 Arm Cylinder Seal Kit for John Deere and Hitachi Excavators
Product Overview
The 4654422 arm cylinder seal kit is a factory-manufactured aftermarket replacement kit cross-referenced against the part number 4654422 used on John Deere and Hitachi excavators. The current page identifies the number as the arm cylinder seal kit for John Deere and Hitachi excavator lines and lists the John Deere 220DW and 225DLC together with the Hitachi ZX200-3, ZX210-3, ZX220W-3 and ZX225US-3 models.
DJF Seals manufactures and supplies the 4654422 kit at factory-direct wholesale pricing for excavator dealers, rental fleets, repair shops and fleet maintenance programs.
Verified Application
The following application data is based on the current product page and the parts listings reviewed for this package:
| Part Number | 4654422 |
| Product Type | Arm cylinder seal kit (aftermarket replacement) |
| Cylinder Position | Arm cylinder (identified by the current page title) |
| Fitments Listed on the Page | John Deere 220DW and 225DLC; Hitachi ZX200-3, ZX210-3, ZX210-3-AMS, ZX210-3-HCME, ZX220W-3 and ZX225US-3 excavators |
| Machine Family | John Deere and Hitachi excavators (confirmed at family level by the page URL and title) |
| Condition | New, aftermarket replacement |
The rod/bore figures (95 mm x 135 mm) and the material claims (PU / NBR / PTFE) shown on the current page are factory data; in this review the dimension figures were found only in a single independent catalog line, so they are not asserted above (see Fitment Verification).
Replacement Scope
This kit supplies the sealing elements required to reseal the arm cylinder of the John Deere and Hitachi excavators listed on the current page. Because that model list is page-provided, the kit is matched at order time against the actual cylinder being repaired — send the machine model, the cylinder part number or a photo of the seals so the factory confirms the correct component set.
Fitment Verification
The part number, position and fitments above were reviewed as follows:
- Current page (djfseal.com): identifies 4654422 as an arm cylinder seal kit for John Deere and Hitachi excavators, listing John Deere 220DW / 225DLC and Hitachi ZX200-3, ZX210-3, ZX210-3-AMS, ZX210-3-HCME, ZX220W-3 and ZX225US-3.
- Hercules Sealing Products catalog (herculesus.com): contains a 4654422 line carrying the same 95 mm / 135 mm figures as the page. This was the only independent occurrence of that dimension set located in this review; a second independent confirmation was not found, so the figures are treated as not independently established.
- Conflict note: the specific model list above is page-provided; the independent listings reviewed for this package do not all agree on the same model set, so each machine model and the cylinder part number should be verified before ordering.
- Conflict note: variant suffixes (ZX210-3-AMS, ZX210-3-HCME) appear on the page; confirm your machine’s exact model and serial number with our team.
- Materials, pressure, temperature, exact piece counts, certifications and service life are not independently verified for this part number.
Factory Inspection & Packing
Each 4654422 kit is assembled and checked at the DJF factory before packing. Sealing elements are placed in labeled poly bags marked with the part number, then packed into export cartons for protection during international shipping. Kits can be packed under DJF branding, neutral packaging, or your own private label for distribution.
Wholesale Ordering
DJF Seals supplies the 4654422 kit at factory-direct wholesale pricing for distributors, dealers and repair shops. To request a quotation, send your part number and quantity to [email protected] or [email protected]. OEM/ODM service, custom packaging and bulk container shipping are available for regular programs.
MOQ
MOQ: 5 kits.
FAQ
Q: Which machines does the 4654422 seal kit fit?
A: The current page lists the kit for John Deere 220DW and 225DLC and for Hitachi ZX200-3, ZX210-3, ZX220W-3 and ZX225US-3 excavators. Verify the model and the cylinder part number on your machine before ordering.
Q: Which cylinder does this kit service?
A: The page identifies the kit as an arm cylinder seal kit. Confirm the cylinder position on the machine you are repairing before ordering.
Q: What are the kit’s rod and bore dimensions?
A: The 95 mm x 135 mm figures shown on the page were found in only one independent catalog line in this review, so they are not asserted here. Send the measured rod/bore or the seals removed from your cylinder and our team will match the kit.
Q: Can you check fitment for my machine before shipping?
A: Yes — send the machine model, cylinder part number or photos of the seals to [email protected] or [email protected] and the factory will verify the match.
Q: What is the minimum order quantity?
A: MOQ: 5 kits.
